hilfe mein git ist komisch

etc/cloud/templates/ntp.conf.ubuntu.tmpl

@@ -0,0 +1,78 @@
+## template:jinja
+
+# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
+
+driftfile /var/lib/ntp/ntp.drift
+
+# Enable this if you want statistics to be logged.
+#statsdir /var/log/ntpstats/
+
+statistics loopstats peerstats clockstats
+filegen loopstats file loopstats type day enable
+filegen peerstats file peerstats type day enable
+filegen clockstats file clockstats type day enable
+
+# Specify one or more NTP servers.
+
+# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
+# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
+# more information.
+{% if pools %}# pools
+{% endif %}
+{% for pool in pools -%}
+pool {{pool}} iburst
+{% endfor %}
+{%- if servers %}# servers
+{% endif %}
+{% for server in servers -%}
+server {{server}} iburst
+{% endfor %}
+{% for peer in peers -%}
+peer {{peer}}
+{% endfor %}
+
+# Use Ubuntu's ntp server as a fallback.
+# pool ntp.ubuntu.com
+
+# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
+# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
+# might also be helpful.
+#
+# Note that "restrict" applies to both servers and clients, so a configuration
+# that might be intended to block requests from certain clients could also end
+# up blocking replies from your own upstream servers.
+
+# By default, exchange time with everybody, but don't allow configuration.
+restrict -4 default kod notrap nomodify nopeer noquery limited
+restrict -6 default kod notrap nomodify nopeer noquery limited
+
+# Local users may interrogate the ntp server more closely.
+restrict 127.0.0.1
+restrict ::1
+
+# Needed for adding pool entries
+restrict source notrap nomodify noquery
+
+# Clients from this (example!) subnet have unlimited access, but only if
+# cryptographically authenticated.
+#restrict 192.168.123.0 mask 255.255.255.0 notrust
+
+
+# If you want to provide time to your local subnet, change the next line.
+# (Again, the address is an example only.)
+#broadcast 192.168.123.255
+
+# If you want to listen to time broadcasts on your local subnet, de-comment the
+# next lines.  Please do this only if you trust everybody on the network!
+#disable auth
+#broadcastclient
+
+#Changes required to use pps synchronisation as explained in documentation:
+#http://www.ntp.org/ntpfaq/NTP-s-config-adv.htm#AEN3918
+
+#server 127.127.8.1 mode 135 prefer    # Meinberg GPS167 with PPS
+#fudge 127.127.8.1 time1 0.0042        # relative to PPS for my hardware
+
+#server 127.127.22.1                   # ATOM(PPS)
+#fudge 127.127.22.1 flag3 1            # enable PPS API
+