hilfe mein git ist komisch

etc/modprobe.d/blacklist-ath_pci.conf

@@ -0,0 +1,7 @@
+# For some Atheros 5K RF MACs, the madwifi driver loads buts fails to
+# correctly initialize the hardware, leaving it in a state from
+# which ath5k cannot recover. To prevent this condition, stop
+# madwifi from loading by default. Use Jockey to select one driver
+# or the other. (Ubuntu: #315056, #323830)
+blacklist ath_pci
+

etc/modprobe.d/blacklist-firewire.conf

@@ -0,0 +1,10 @@
+# Select the legacy firewire stack over the new CONFIG_FIREWIRE one.
+
+blacklist ohci1394
+blacklist sbp2
+blacklist dv1394
+blacklist raw1394
+blacklist video1394
+
+#blacklist firewire-ohci
+#blacklist firewire-sbp2

etc/modprobe.d/blacklist-framebuffer.conf

@@ -0,0 +1,31 @@
+# Framebuffer drivers are generally buggy and poorly-supported, and cause
+# suspend failures, kernel panics and general mayhem.  For this reason we
+# never load them automatically.
+blacklist aty128fb
+blacklist atyfb
+blacklist radeonfb
+blacklist cirrusfb
+blacklist cyber2000fb
+blacklist cyblafb
+blacklist gx1fb
+blacklist hgafb
+blacklist i810fb
+blacklist intelfb
+blacklist kyrofb
+blacklist lxfb
+blacklist matroxfb_base
+blacklist neofb
+blacklist nvidiafb
+blacklist pm2fb
+blacklist rivafb
+blacklist s1d13xxxfb
+blacklist savagefb
+blacklist sisfb
+blacklist sstfb
+blacklist tdfxfb
+blacklist tridentfb
+#blacklist vesafb
+blacklist vfb
+blacklist viafb
+blacklist vt8623fb
+blacklist udlfb

etc/modprobe.d/blacklist-rare-network.conf

@@ -0,0 +1,22 @@
+# Many less commonly used network protocols have recently had various
+# security flaws discovered. In an effort to reduce the scope of future
+# vulnerability exploitations, they are being blacklisted here so that
+# unprivileged users cannot use them by default. System owners can still
+# either modify this file, or specifically modprobe any needed protocols.
+
+# ax25
+alias net-pf-3 off
+# netrom
+alias net-pf-6 off
+# x25
+alias net-pf-9 off
+# rose
+alias net-pf-11 off
+# decnet
+alias net-pf-12 off
+# econet
+alias net-pf-19 off
+# rds
+alias net-pf-21 off
+# af_802154
+alias net-pf-36 off

etc/modprobe.d/blacklist.conf

@@ -0,0 +1,52 @@
+# This file lists those modules which we don't want to be loaded by
+# alias expansion, usually so some other driver will be loaded for the
+# device instead.
+
+# evbug is a debug tool that should be loaded explicitly
+blacklist evbug
+
+# these drivers are very simple, the HID drivers are usually preferred
+blacklist usbmouse
+blacklist usbkbd
+
+# replaced by e100
+blacklist eepro100
+
+# replaced by tulip
+blacklist de4x5
+
+# causes no end of confusion by creating unexpected network interfaces
+blacklist eth1394
+
+# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
+# hardware on its own (Ubuntu bug #2011, #6810)
+blacklist snd_intel8x0m
+
+# Conflicts with dvb driver (which is better for handling this device)
+blacklist snd_aw2
+
+# replaced by p54pci
+blacklist prism54
+
+# replaced by b43 and ssb.
+blacklist bcm43xx
+
+# most apps now use garmin usb driver directly (Ubuntu: #114565)
+blacklist garmin_gps
+
+# replaced by asus-laptop (Ubuntu: #184721)
+blacklist asus_acpi
+
+# low-quality, just noise when being used for sound playback, causes
+# hangs at desktop session start (Ubuntu: #246969)
+blacklist snd_pcsp
+
+# ugly and loud noise, getting on everyone's nerves; this should be done by a
+# nice pulseaudio bing (Ubuntu: #77010)
+blacklist pcspkr
+
+# EDAC driver for amd76x clashes with the agp driver preventing the aperture
+# from being initialised (Ubuntu: #297750). Blacklist so that the driver
+# continues to build and is installable for the few cases where its
+# really needed.
+blacklist amd76x_edac

etc/modprobe.d/iwlwifi.conf

@@ -0,0 +1,7 @@
+# /etc/modprobe.d/iwlwifi.conf
+# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
+# microcode file installed on the system.  When removing iwlwifi, first
+# remove the iwl?vm module and then iwlwifi.
+remove iwlwifi \
+(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
+&& /sbin/modprobe -r mac80211

etc/modprobe.d/mdadm.conf

@@ -0,0 +1,8 @@
+# mdadm module configuration file
+# set start_ro=1 to make newly assembled arrays read-only initially,
+# to prevent metadata writes.  This is needed in order to allow
+# resume-from-disk to work - new boot should not perform writes
+# because it will be done behind the back of the system being
+# resumed.  See http://bugs.debian.org/415441 for details.
+
+options md_mod start_ro=1