34 lines
1.6 KiB
Plaintext
34 lines
1.6 KiB
Plaintext
# do not edit this file, it will be overwritten on update
|
|
|
|
# Tag any devices that MM might be interested in; if ModemManager is started
|
|
# up right after udev, when MM explicitly requests devices on startup it may
|
|
# get devices that haven't had all rules run yet. Thus, we tag devices we're
|
|
# interested in and when handling devices during MM startup we ignore any
|
|
# that don't have this tag. MM will still get the udev 'add' event for the
|
|
# device a short while later and then process it as normal.
|
|
|
|
ACTION!="add|change|move|bind", GOTO="mm_candidate_end"
|
|
|
|
# Opening bound but disconnected Bluetooth RFCOMM ttys would initiate the
|
|
# connection. Don't do that.
|
|
KERNEL=="rfcomm*", DEVPATH=="*/virtual/*", GOTO="mm_candidate_end"
|
|
|
|
# All Qualcomm-based USB devices may switch to a recovery layout with a single
|
|
# serial port in QDL mode if they fail to boot correctly too many times.
|
|
SUBSYSTEMS=="usb", ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9008", ENV{ID_MM_DEVICE_IGNORE}="1"
|
|
|
|
# Generic candidate rules for tty/usbmisc/net subsystems
|
|
SUBSYSTEM=="tty", ENV{ID_MM_CANDIDATE}="1"
|
|
SUBSYSTEM=="net", ENV{ID_MM_CANDIDATE}="1"
|
|
KERNEL=="cdc-wdm*", SUBSYSTEM=="usbmisc", ENV{ID_MM_CANDIDATE}="1"
|
|
|
|
# WWAN subsystem candidate rules
|
|
# - All USB devices ignored for now, only PCI devices expected
|
|
# - Only "wwan_port" device types processed (single ports); we fully ignore
|
|
# the "wwan_dev" device type (full device, not just one port)
|
|
SUBSYSTEMS=="usb", GOTO="mm_candidate_end"
|
|
SUBSYSTEM=="wwan", ENV{DEVTYPE}=="wwan_dev", GOTO="mm_candidate_end"
|
|
SUBSYSTEM=="wwan", ENV{ID_MM_CANDIDATE}="1"
|
|
|
|
LABEL="mm_candidate_end"
|